Corvette C8/Z06/E-Ray ST-Style Carbon Fiber Hood | VASL Performance

ST-Style Double-Sided Carbon Fiber Hood for 2020–2026 Corvette C8

Transform the front profile of your Corvette C8 with the VASL ST-Style Double-Sided Carbon Fiber Hood.

Designed for Corvette C8 Stingray, Z51, Z06, and E-Ray models, this complete replacement hood introduces a raised center profile and more defined surface contours while preserving the recognizable proportions of the factory C8 front end.

The hood is constructed from double-sided pre-preg 2x2 3K carbon fiber, with visible carbon fiber across both the exterior surface and underside. This creates a complete carbon fiber presentation whether the hood is open or closed.

This product is a full replacement hood. The factory hood must be removed during installation. It is not a carbon fiber overlay, decorative hood skin, or tape-on cover.

🔥 Key Highlights

✅ Double-sided pre-preg 2x2 3K carbon fiber
✅ Visible carbon fiber exterior and underside
✅ Full replacement hood—not an overlay
✅ Sculpted ST-style center profile
✅ Designed for Corvette C8 Stingray, Z51, Z06, and E-Ray
✅ Gloss UV-resistant clear coat
✅ Designed around factory hood mounting locations
✅ Reuses applicable factory hinges, latch, and hardware
✅ Made to order and inspected before shipment
✅ 90-Day Structural Warranty

✨ What You’ll Notice Immediately

✅ A more aggressive and sculpted Corvette C8 front profile
✅ Visible 2x2 twill carbon fiber from exterior viewing angles
✅ A complete carbon fiber appearance when the hood is open
✅ Defined ST-style center contours and surface transitions
✅ A more distinctive appearance than the factory hood
✅ Carbon fiber styling that coordinates with front splitters, side skirts, canards, and rear aero components

🧩 Double-Sided Carbon Fiber Construction

The hood is manufactured from double-sided pre-preg 2x2 3K carbon fiber.

Both the exterior surface and underside feature visible carbon fiber, creating a consistent presentation across the complete hood.

✅ Double-sided carbon fiber construction
✅ Pre-preg 2x2 3K carbon fiber material
✅ Visible woven carbon fiber exterior
✅ Visible woven carbon fiber underside
✅ Gloss UV-resistant clear coat
✅ One-piece molded replacement-hood structure
✅ Inspected before shipment for finish quality and mounting-area condition

“Double-sided” means visible carbon fiber is present across both the exterior and underside of the hood.

🚘 Full Replacement Hood Design

This ST-style hood is designed to replace the original Corvette C8 front hood.

The factory hood must be removed, and applicable OEM components must be transferred to the carbon fiber replacement hood during installation.

✅ Complete replacement hood
✅ Not a tape-on or adhesive-mounted overlay
✅ Not a carbon fiber hood skin
✅ Designed around factory hood mounting locations
✅ Reuses applicable OEM hinges and latch components
✅ Maintains access to the front storage compartment
✅ Final panel alignment and latch adjustment are required

This product is not designed to install over the original factory hood.

📌 Fitment

Compatible with:

✅ 2020–2026 Corvette C8 Stingray
✅ 2020–2026 Corvette C8 Stingray with Z51 Performance Package
✅ 2023–2026 Corvette C8 Z06
✅ 2024–2026 Corvette C8 E-Ray

Before ordering, please confirm:

✅ Your model year
✅ Your Corvette C8 model
✅ Your factory hood and surrounding body panels are undamaged
✅ Your vehicle has not undergone structural front-body modification
✅ The product has been completely inspected and test fitted before modification or refinishing

Fitment has not been confirmed for Corvette C8 ZR1 or ZR1X models.

📦 What’s Included

✅ One ST-style double-sided carbon fiber replacement hood

Please note:

Factory hinges, latch components, hood struts, bump stops, wiring, brackets, and related vehicle hardware are not listed as included unless specifically confirmed with your order.

Applicable OEM components may need to be transferred from the original hood during installation.

🔧 Installation Details

✅ Full replacement hood installation
✅ Designed around factory hood mounting locations
✅ Applicable factory hinges and latch components are reused
✅ Complete test fitting is required before modification or refinishing
✅ Hood height and panel gaps must be adjusted during installation
✅ Latch engagement must be fully verified before driving
✅ Clearance around surrounding body panels must be inspected
✅ Professional installation is required

Important:

⚠ Do not drill, modify, paint, refinish, or install the hood before completing a full inspection and test fit
⚠ Do not force the hood closed if the latch or surrounding panel alignment is incorrect
⚠ Minor adjustment may be required to achieve consistent panel gaps
⚠ Always confirm that the primary and secondary hood-latch functions are operating correctly
⚠ Make sure the hood is fully secured before driving
⚠ Installation damage and damage caused by incorrect alignment are not manufacturing defects

Professional installation by an experienced body shop or Corvette performance installer is required.

📦 Production Note

✅ This is a made-to-order carbon fiber product
✅ Estimated production lead time is around 15 business days before shipment
✅ Each hood is inspected before shipment for visible finish quality and mounting-area condition
✅ Production time begins after order and vehicle information have been confirmed

🏁 Why Choose VASL Precision Series

✅ Double-sided carbon fiber presentation inside and out
✅ Pre-preg 2x2 3K carbon fiber material
✅ Full replacement design rather than a decorative overlay
✅ Designed specifically for Corvette C8 applications
✅ ST-style sculpted exterior profile
✅ Gloss UV-resistant carbon fiber finish
✅ Clear made-to-order production expectations
✅ Backed by a 90-Day Structural Warranty

⚠ Legal Notice — California Proposition 65

This product may expose you to:

Styrene — cancer risk
Bisphenol A (BPA) — reproductive harm

Please review our Terms & Conditions before ordering.

• Customers must submit a Return Merchandise Authorization (RMA) request within 30 days of delivery to qualify for a refund.
  
• Products must be returned to our shipping facility at the buyer’s expense.
  
• All approved returns are subject to a 25% restocking fee.
  
• Special-order or custom-built products are non-returnable.
  
• If the product was purchased through an authorized VASL Performance dealer, please contact the dealer directly for all order and return inquiries.
  
• 
  We do not accept returns for any items that have been used, modified, painted, or installed.
  
• 
  Original shipping and handling fees are non-refundable.
  
• 
  Returned products must be shipped in their original packaging, in the same condition as originally delivered.
  
• 
  Only the original purchaser may request a return.
  
• 
  Defective items may be exchanged for the same item only. Upon receipt of the returned product, VASL Performance will inspect the item to verify its condition. If the product is deemed non-defective or non-returnable, the buyer will be responsible for any incurred costs.
  
• 
  All returns must be shipped prepaid. Any packages sent collect on delivery (COD) will be refused and returned at the buyer’s expense.
  
• 
  Refunds will not be issued for products that are damaged during return shipping to VASL Performance.

Manufacturing Time:

This carbon fiber product is made to order and requires approximately 15 business days for production before shipment.

We strive to provide accurate ETAs, but due to the made-to-order nature of performance-grade components, exact delivery times cannot be guaranteed.

⸻

Shipping Damage Policy

All products are carefully packaged to minimize the risk of damage during transit. However, occasional incidents may occur.
Upon delivery, buyers must inspect all packages and contents immediately before signing for the shipment.

If you notice any damage or irregularities (such as crushed, punctured, or torn boxes), please:
1. Do not accept the shipment, or
2. Clearly note all visible damages on the freight bill in the driver’s presence.

Accepting the shipment without notation releases both the shipping carrier and VASL Performance from further damage claims.

All damage claims must be reported to both the carrier and VASL Performance within 24 hours of delivery.