Corvette C8 Stingray/Z51 ZR1-Style Front Splitter | VASL Performance

Pre-Preg Carbon Fiber ZR1-Style 5-Piece Front Splitter for 2020–2026 Corvette C8 Stingray / Z51

Upgrade the front-end profile of your Corvette C8 Stingray with the VASL ZR1-Style 5-Piece Pre-Preg Carbon Fiber Front Splitter.

Designed for 2020–2026 Corvette C8 Stingray models, including vehicles equipped with the Z51 Performance Package, this complete five-piece kit adds a wider, lower, and more aggressive appearance beneath the factory front bumper.

The modular kit includes one center splitter section, two extended side sections, and two separate corner winglets. Each section is manufactured from pre-preg 2x2 3K carbon fiber and finished with a gloss UV-resistant clear coat that highlights the twill weave while helping protect the finish from long-term sun exposure.

This product is a five-piece aftermarket add-on front splitter kit. It installs beneath the existing factory Stingray front bumper and is not a complete replacement bumper, one-piece splitter, or cosmetic surface overlay.

🔥 Key Highlights

✅ Pre-preg 2x2 3K carbon fiber construction
✅ Complete five-piece modular splitter kit
✅ One center section included
✅ Two side splitter sections included
✅ Two separate corner winglets included
✅ Designed for Corvette C8 Stingray and Z51
✅ Gloss UV-resistant clear coat
✅ Mounting hardware included
✅ Screw-on installation with drilling required
✅ Made to order and inspected before shipment
✅ 90-Day Structural Warranty

✨ What You’ll Notice Immediately

✅ A wider and more aggressive front-end appearance
✅ A lower visual stance beneath the factory front bumper
✅ Extended side sections that visually widen the front profile
✅ Separate corner winglets for a more layered design
✅ Clear 2x2 twill carbon fiber weave
✅ Better coordination with carbon fiber side skirts, canards, rear diffusers, and spoilers
✅ A more distinctive appearance than the factory Stingray front bumper

🧩 Pre-Preg Carbon Fiber Construction

The five splitter components are manufactured from pre-preg 2x2 3K carbon fiber.

✅ Pre-preg carbon fiber construction
✅ 2x2 3K twill carbon weave
✅ Lightweight and rigid multi-piece structure
✅ Gloss UV-resistant clear coat
✅ Clear and consistent carbon weave appearance
✅ Each section inspected before shipment for finish quality and fitment readiness

This product should be described as:

Pre-preg 2x2 3K carbon fiber

It should not be described as dry carbon fiber unless that production process has been separately confirmed.

🧩 Five-Piece Modular Design

This front splitter uses a five-piece modular construction consisting of:

✅ One center front splitter section
✅ Two extended side splitter sections
✅ Two separate corner winglets

The center and side sections form the main lower splitter profile, while the two corner winglets add additional visual width and a more aggressive transition at each end of the factory front bumper.

Because this is a multi-piece product, all five sections must be completely test fitted and positioned before any holes are drilled or mounting hardware is fully tightened.

This product is not:

A one-piece front splitter
A complete replacement front bumper
A factory replacement lower bumper assembly
A stick-on cosmetic carbon fiber overlay
📌 Fitment

Compatible with:

✅ 2020–2026 Corvette C8 Stingray
✅ Stingray models with the Z51 Performance Package
✅ Stingray models without the Z51 Performance Package
✅ Coupe and Convertible models

Not listed as compatible with:

Corvette C8 Z06
Corvette C8 E-Ray
Corvette C8 ZR1

Before ordering, please confirm:

✅ Your Corvette model year
✅ Your vehicle is a C8 Stingray
✅ Whether your vehicle has the Z51 Performance Package
✅ Your factory front bumper and lower mounting areas are undamaged
✅ No aftermarket front bumper or existing splitter will interfere with installation

📦 What’s Included

✅ One center pre-preg carbon fiber splitter section
✅ Two pre-preg carbon fiber side splitter sections
✅ Two pre-preg carbon fiber corner winglets
✅ Mounting hardware

Please note:

The factory front bumper, factory underbody panels, replacement bumper brackets, tools, and professional installation labor are not included.

Adhesive tape may be used as installation support. Adhesive tape is not listed as included unless specifically confirmed with your order.

🔧 Installation Details

✅ Five-piece screw-on installation
✅ Drilling is required for secure mounting
✅ Adhesive support may be used during installation
✅ Complete test fitting is required before drilling
✅ All five components must be centered and aligned before final tightening
✅ Begin installation with the center section
✅ Confirm equal positioning on both sides before installing the side sections
✅ Install the corner winglets only after the main splitter sections are correctly aligned
✅ Recheck ground clearance after installation

Important:

⚠ Do not drill any holes before all five sections have been completely test fitted
⚠ Do not fully tighten one section before confirming the alignment of the remaining components
⚠ Uneven positioning of the center section may cause visible gaps between the five components
⚠ Over-tightening the mounting hardware may damage the carbon fiber
⚠ Existing aftermarket front lips, splitters, or bumper modifications may affect fitment
⚠ The extended splitter profile reduces front ground clearance
⚠ Use additional caution on steep driveways, parking blocks, ramps, and speed bumps
⚠ Recheck all mounting points after the initial installation and after the first period of driving

Professional installation is strongly recommended because proper alignment and drilling are required across all five components.

📦 Production Note

✅ This is a made-to-order pre-preg carbon fiber product
✅ Estimated production lead time is around 15 business days before shipment
✅ Each component is inspected before shipment for finish quality and fitment readiness
✅ Production time and shipping time are calculated separately

🏁 Why Choose VASL Precision Series

✅ Pre-preg 2x2 3K carbon fiber construction
✅ Complete five-piece splitter system
✅ Designed specifically for the Corvette C8 Stingray front bumper
✅ Center section, side sections, and corner winglets included
✅ Gloss carbon fiber finish
✅ Designed to coordinate with matching VASL carbon fiber exterior components
✅ Mounting hardware included
✅ Backed by a 90-Day Structural Warranty

⚠ Legal Notice — California Proposition 65

This product may expose you to:

Styrene — cancer risk
Bisphenol A (BPA) — reproductive harm

Please review our Terms & Conditions before ordering.

• Customers must submit a Return Merchandise Authorization (RMA) request within 30 days of delivery to qualify for a refund.
  
• Products must be returned to our shipping facility at the buyer’s expense.
  
• All approved returns are subject to a 25% restocking fee.
  
• Special-order or custom-built products are non-returnable.
  
• If the product was purchased through an authorized VASL Performance dealer, please contact the dealer directly for all order and return inquiries.
  
• 
  We do not accept returns for any items that have been used, modified, painted, or installed.
  
• 
  Original shipping and handling fees are non-refundable.
  
• 
  Returned products must be shipped in their original packaging, in the same condition as originally delivered.
  
• 
  Only the original purchaser may request a return.
  
• 
  Defective items may be exchanged for the same item only. Upon receipt of the returned product, VASL Performance will inspect the item to verify its condition. If the product is deemed non-defective or non-returnable, the buyer will be responsible for any incurred costs.
  
• 
  All returns must be shipped prepaid. Any packages sent collect on delivery (COD) will be refused and returned at the buyer’s expense.
  
• 
  Refunds will not be issued for products that are damaged during return shipping to VASL Performance.

Manufacturing Time:

This carbon fiber product is made to order and requires approximately 15 business days for production before shipment.

We strive to provide accurate ETAs, but due to the made-to-order nature of performance-grade components, exact delivery times cannot be guaranteed.

⸻

Shipping Damage Policy

All products are carefully packaged to minimize the risk of damage during transit. However, occasional incidents may occur.
Upon delivery, buyers must inspect all packages and contents immediately before signing for the shipment.

If you notice any damage or irregularities (such as crushed, punctured, or torn boxes), please:
1. Do not accept the shipment, or
2. Clearly note all visible damages on the freight bill in the driver’s presence.

Accepting the shipment without notation releases both the shipping carrier and VASL Performance from further damage claims.

All damage claims must be reported to both the carrier and VASL Performance within 24 hours of delivery.