Corvette C8 Dry Carbon Fiber Mirror Covers | VASL Performance

Dry Carbon Fiber Mirror Cover Overlays for 2020–2026 Corvette C8

Upgrade the side profile of your Corvette C8 with the VASL Dry Carbon Fiber Mirror Cover Overlay Set.

Designed for Corvette C8 Stingray, Z06, and E-Ray models, this complete driver- and passenger-side set installs over the factory mirror caps while adding the depth, weave clarity, and premium appearance of genuine dry carbon fiber.

Each overlay is manufactured from pre-preg 2x2 3K carbon fiber and finished with a gloss UV-resistant clear coat that highlights the twill weave while helping protect the finish from long-term sun exposure.

This product is a tape-on mirror cover overlay set. It installs over the existing factory mirror caps and is not a full replacement mirror-cap assembly.

🔥 Key Highlights

✅ Genuine dry carbon fiber construction
✅ Pre-preg 2x2 3K carbon fiber material
✅ Driver- and passenger-side overlays included
✅ Designed for Corvette C8 Stingray, Z06, and E-Ray
✅ Installs over the factory mirror caps
✅ Tape-on overlay installation
✅ No drilling required
✅ No factory mirror-cap removal required
✅ Gloss UV-resistant clear coat
✅ Made to order and inspected before shipment
✅ 90-Day Structural Warranty

✨ What You’ll Notice Immediately

✅ A cleaner and more premium exterior mirror profile
✅ Visible dry carbon fiber from the front, side, and rear angles
✅ Clear 2x2 twill carbon weave depth
✅ A noticeable upgrade over the factory painted mirror finish
✅ Better coordination with carbon fiber side skirts, door garnish, front splitters, and rear aero components
✅ A premium carbon fiber appearance without replacing the original mirror caps

🧩 Dry Carbon Fiber Construction

The mirror cover overlays are manufactured from pre-preg 2x2 3K carbon fiber, commonly referred to as dry carbon fiber.

✅ Pre-preg dry carbon fiber construction
✅ 2x2 3K twill carbon weave
✅ Lightweight and rigid overlay structure
✅ Gloss UV-resistant clear coat
✅ Clear and consistent carbon weave appearance
✅ Inspected before shipment for finish quality and fitment readiness

🪞 Tape-On Overlay Design

These mirror covers are designed to install directly over the factory Corvette C8 mirror caps.

Unlike full replacement mirror caps, the factory covers do not need to be removed during installation.

✅ Installs over the existing factory mirror caps
✅ No factory mirror-cap removal required
✅ No drilling required
✅ Retains the original mirror structure and functions
✅ Driver- and passenger-side overlays included

This product is not a direct-replacement or clip-on mirror-cap assembly.

📌 Fitment

Compatible with:

✅ 2020–2026 Corvette C8 Stingray
✅ 2023–2026 Corvette C8 Z06
✅ 2024–2026 Corvette C8 E-Ray
✅ Coupe and Convertible models
✅ Stingray models with or without the Z51 Performance Package

Before ordering, please confirm:

✅ Your model year
✅ Your Corvette C8 model
✅ Your current factory mirror-cap condition
✅ The mounting surfaces are clean, undamaged, and suitable for adhesive installation

📦 What’s Included

✅ Driver-side dry carbon fiber mirror cover overlay
✅ Passenger-side dry carbon fiber mirror cover overlay

Please note:

Factory mirror caps, mirror assemblies, replacement mounting clips, and mirror electronics are not included and do not need to be removed for installation.

Double-sided adhesive tape is required for installation. Adhesive tape is not listed as included unless specifically confirmed with your order.

🔧 Installation Details

✅ Tape-on overlay installation
✅ No drilling required
✅ No factory mirror-cap removal required
✅ Complete test fitting is required before applying adhesive
✅ All mounting surfaces must be thoroughly cleaned, dried, and degreased
✅ Proper alignment must be confirmed before applying firm pressure
✅ Verify mirror folding, adjustment, and clearance after installation

Important:

⚠ Wax, polish, ceramic coating, dirt, grease, oil, or moisture may reduce adhesive performance
⚠ Do not apply adhesive until both mirror overlays have been test fitted
⚠ Do not install on wet, dirty, recently waxed, or excessively cold surfaces
⚠ Allow sufficient bonding time before washing the vehicle or driving in severe weather
⚠ Make sure both overlays are securely installed before driving

Professional installation is recommended for the cleanest alignment and best long-term adhesive performance.

📦 Production Note

✅ This is a made-to-order dry carbon fiber product
✅ Estimated production lead time is around 15 business days before shipment
✅ Each pair is inspected before shipment for finish quality and fitment readiness

🏁 Why Choose VASL Precision Series

✅ Genuine pre-preg dry carbon fiber
✅ Complete driver- and passenger-side overlay set
✅ Designed specifically for the factory Corvette C8 mirror profile
✅ No factory mirror-cap removal required
✅ Premium gloss carbon fiber finish
✅ Designed to coordinate with matching VASL dry carbon fiber exterior components
✅ Backed by a 90-Day Structural Warranty

⚠ Legal Notice — California Proposition 65

This product may expose you to:

Styrene — cancer risk
Bisphenol A (BPA) — reproductive harm

Please review our Terms & Conditions before ordering.

• Customers must submit a Return Merchandise Authorization (RMA) request within 30 days of delivery to qualify for a refund.
  
• Products must be returned to our shipping facility at the buyer’s expense.
  
• All approved returns are subject to a 25% restocking fee.
  
• Special-order or custom-built products are non-returnable.
  
• If the product was purchased through an authorized VASL Performance dealer, please contact the dealer directly for all order and return inquiries.
  
• 
  We do not accept returns for any items that have been used, modified, painted, or installed.
  
• 
  Original shipping and handling fees are non-refundable.
  
• 
  Returned products must be shipped in their original packaging, in the same condition as originally delivered.
  
• 
  Only the original purchaser may request a return.
  
• 
  Defective items may be exchanged for the same item only. Upon receipt of the returned product, VASL Performance will inspect the item to verify its condition. If the product is deemed non-defective or non-returnable, the buyer will be responsible for any incurred costs.
  
• 
  All returns must be shipped prepaid. Any packages sent collect on delivery (COD) will be refused and returned at the buyer’s expense.
  
• 
  Refunds will not be issued for products that are damaged during return shipping to VASL Performance.

Manufacturing Time:

This carbon fiber product is made to order and requires approximately 15 business days for production before shipment.

We strive to provide accurate ETAs, but due to the made-to-order nature of performance-grade components, exact delivery times cannot be guaranteed.

⸻

Shipping Damage Policy

All products are carefully packaged to minimize the risk of damage during transit. However, occasional incidents may occur.
Upon delivery, buyers must inspect all packages and contents immediately before signing for the shipment.

If you notice any damage or irregularities (such as crushed, punctured, or torn boxes), please:
1. Do not accept the shipment, or
2. Clearly note all visible damages on the freight bill in the driver’s presence.

Accepting the shipment without notation releases both the shipping carrier and VASL Performance from further damage claims.

All damage claims must be reported to both the carrier and VASL Performance within 24 hours of delivery.