Corvette C8 Stingray/Z51 Carbon Fiber Front Lip | VASL Performance

OEM+ Style 2-Piece Carbon Fiber Front Lip for 2020–2026 Corvette C8 Stingray

Upgrade the front profile of your Corvette C8 Stingray with the VASL OEM+ Style Two-Piece Carbon Fiber Front Lip.

Designed for 2020–2026 Corvette C8 Stingray models, with or without the Z51 Performance Package, this front lip follows the factory lower-bumper contours while adding a more defined and complete visible carbon fiber profile.

The package includes separate driver-side and passenger-side sections that form a cohesive full-width appearance once properly aligned and installed. Its OEM+ design preserves the original character of the C8 front bumper without the exaggerated projection or large vertical winglets found on more aggressive 5VM-style splitters.

Each section is manufactured from pre-preg 2x2 3K carbon fiber and finished with a gloss UV-resistant clear coat that highlights the twill weave while helping protect the finish from long-term sun exposure.

This product is a two-piece carbon fiber front lip set. It is not a one-piece splitter, tape-on overlay, complete replacement bumper, or 5VM-style front splitter.

🔥 Key Highlights

✅ Pre-preg 2x2 3K carbon fiber construction
✅ Complete two-piece front lip set
✅ Driver-side and passenger-side sections included
✅ OEM+ factory-inspired front profile
✅ Designed for 2020–2026 Corvette C8 Stingray
✅ Compatible with models with or without the Z51 Performance Package
✅ Designed around the factory Stingray lower front-bumper contours
✅ Gloss UV-resistant clear coat
✅ Installation hardware included
✅ Made to order and inspected before shipment
✅ 90-Day Structural Warranty

✨ What You’ll Notice Immediately

✅ A cleaner and more complete carbon fiber front profile
✅ Visible 2x2 twill carbon fiber across the lower front bumper
✅ Greater visual definition around the front corners
✅ A lower and wider-looking front stance
✅ Better coordination with carbon fiber side skirts, canards, mirror covers, and rear aero components
✅ An OEM+ appearance without the oversized projection of a track-style splitter

🧩 Pre-Preg Carbon Fiber Construction

The front lip is manufactured from pre-preg 2x2 3K carbon fiber.

✅ Pre-preg carbon fiber construction
✅ 2x2 3K twill carbon weave
✅ Lightweight and rigid molded structure
✅ Gloss UV-resistant clear coat
✅ Clear and consistent carbon weave appearance
✅ Inspected before shipment for finish quality and fitment readiness

This product should be described as Pre-Preg Carbon Fiber and should not be promoted as Dry Carbon unless the specific manufacturing classification is separately confirmed.

🚘 OEM+ Two-Piece Design

The front lip consists of separate driver-side and passenger-side sections designed to follow the factory lower front-bumper profile.

Once properly aligned and installed, both sections create a complete front lip appearance across the lower front bumper.

✅ Driver-side front lip section included
✅ Passenger-side front lip section included
✅ Designed around the factory C8 Stingray bumper profile
✅ OEM+ styling without oversized 5VM winglets
✅ Does not replace the factory front bumper
✅ Not a one-piece front splitter
✅ Not a tape-on cosmetic overlay

📌 Fitment

Compatible with:

✅ 2020–2026 Corvette C8 Stingray
✅ Models with the Z51 Performance Package
✅ Models without the Z51 Performance Package
✅ Coupe and Convertible models

Not compatible with:

❌ Corvette C8 Z06
❌ Corvette C8 E-Ray
❌ Corvette C8 ZR1
❌ Corvette C8 ZR1X
❌ Other C8 widebody models

Before ordering, please confirm:

✅ Your model year
✅ Your vehicle is a Corvette C8 Stingray
✅ Whether your vehicle has the Z51 Performance Package
✅ Your factory front bumper is undamaged
✅ The factory mounting areas are complete and suitable for installation

📦 What’s Included

✅ Driver-side pre-preg carbon fiber front lip section
✅ Passenger-side pre-preg carbon fiber front lip section
✅ Installation hardware

Please note:

The factory front bumper, factory grille, side canards, lower grille components, and additional exterior trim are not included.

Automotive-grade double-sided tape may be required for final positioning or edge alignment. Adhesive tape should not be listed as included or pre-applied unless specifically confirmed.

🔧 Installation Details

✅ Two-piece front lip installation
✅ Complete test fitting is required before final installation
✅ Both sections must be aligned before tightening the mounting hardware
✅ Uses the factory lower-bumper mounting areas together with OEM and supplied hardware where required
✅ All mounting surfaces must be clean, dry, and undamaged
✅ Professional installation is recommended

Important:

⚠ Do not fully tighten one side before confirming the alignment of both sections
⚠ Do not drill, trim, sand, or modify the product before completing a full test fit
⚠ Do not install over damaged, loose, or previously modified mounting points
⚠ Verify that all fasteners are secure before driving
⚠ Recheck all mounting hardware after the initial installation period
⚠ The front lip reduces the effective clearance below the front bumper; use additional care around ramps, curbs, parking stops, and steep driveways

Professional installation is recommended for the cleanest alignment, correct mounting, and secure long-term fitment.

📦 Production Note

✅ This is a made-to-order carbon fiber product
✅ Estimated production lead time is around 15 business days before shipment
✅ Each two-piece set is inspected before shipment for finish quality and fitment readiness

🏁 Why Choose VASL Precision Series

✅ Pre-preg 2x2 3K carbon fiber construction
✅ Complete driver-side and passenger-side front lip set
✅ OEM+ styling designed specifically for the C8 Stingray front bumper
✅ Compatible with Stingray models with or without Z51
✅ Premium gloss carbon fiber finish
✅ Positioned below comparable specialist OEM+ carbon fiber front lips
✅ Designed to coordinate with matching VASL carbon fiber exterior components
✅ Backed by a 90-Day Structural Warranty

⚠ Legal Notice — California Proposition 65

This product may expose you to:

Styrene — cancer risk
Bisphenol A (BPA) — reproductive harm

Please review our Terms & Conditions before ordering.

• Customers must submit a Return Merchandise Authorization (RMA) request within 30 days of delivery to qualify for a refund.
  
• Products must be returned to our shipping facility at the buyer’s expense.
  
• All approved returns are subject to a 25% restocking fee.
  
• Special-order or custom-built products are non-returnable.
  
• If the product was purchased through an authorized VASL Performance dealer, please contact the dealer directly for all order and return inquiries.
  
• 
  We do not accept returns for any items that have been used, modified, painted, or installed.
  
• 
  Original shipping and handling fees are non-refundable.
  
• 
  Returned products must be shipped in their original packaging, in the same condition as originally delivered.
  
• 
  Only the original purchaser may request a return.
  
• 
  Defective items may be exchanged for the same item only. Upon receipt of the returned product, VASL Performance will inspect the item to verify its condition. If the product is deemed non-defective or non-returnable, the buyer will be responsible for any incurred costs.
  
• 
  All returns must be shipped prepaid. Any packages sent collect on delivery (COD) will be refused and returned at the buyer’s expense.
  
• 
  Refunds will not be issued for products that are damaged during return shipping to VASL Performance.

Manufacturing Time:

This carbon fiber product is made to order and requires approximately 15 business days for production before shipment.

We strive to provide accurate ETAs, but due to the made-to-order nature of performance-grade components, exact delivery times cannot be guaranteed.

⸻

Shipping Damage Policy

All products are carefully packaged to minimize the risk of damage during transit. However, occasional incidents may occur.
Upon delivery, buyers must inspect all packages and contents immediately before signing for the shipment.

If you notice any damage or irregularities (such as crushed, punctured, or torn boxes), please:
1. Do not accept the shipment, or
2. Clearly note all visible damages on the freight bill in the driver’s presence.

Accepting the shipment without notation releases both the shipping carrier and VASL Performance from further damage claims.

All damage claims must be reported to both the carrier and VASL Performance within 24 hours of delivery.