Corvette C8 Stingray Carbon Fiber Side Vent Garnish | VASL Performance

6-Piece Dry Carbon Fiber Side Fender Vent Door Garnish Overlay Kit for Corvette C8 Z06 / E-Ray

Upgrade the side profile of your C8 Z06 or E-Ray with the VASL 6-Piece Pre-Preg 2x2 3K Dry Carbon Fiber Side Fender Vent Door Garnish Overlay Kit.

Designed specifically for the wider-body Corvette C8 Z06 and E-Ray side intake layout, this kit adds a gloss 2x2 twill dry carbon fiber finish to the factory side fender vent and door garnish areas without requiring door panel removal or full factory trim replacement.

This is an adhesive overlay kit, not a full replacement side intake assembly. It is designed for owners who want a cleaner dry carbon fiber exterior upgrade with a simpler installation process compared to full replacement side vent kits.

🔥 Key Highlights
✅ 6-piece dry carbon fiber overlay kit
✅ Designed for Corvette C8 Z06 and E-Ray models
✅ Pre-preg 2x2 3K Dry Carbon Fiber construction
✅ Gloss UV-resistant clear coat
✅ Covers the side fender vent and door garnish areas
✅ Adhesive installation using automotive-grade double-sided tape
✅ No door panel removal required
✅ No factory door handle mechanism removal required
✅ No cutting or drilling required
✅ Made to order and inspected before shipment
✅ 90-Day Structural Warranty

✨ What You’ll Notice Immediately
✅ A sharper dry carbon fiber side intake appearance
✅ A cleaner transition across the door garnish and side vent area
✅ More premium exterior detail compared to factory black trim
✅ Gloss 2x2 twill dry carbon fiber depth
✅ A stronger match with carbon fiber splitters, side skirts, mirror covers, and rear aero
✅ A simpler installation path compared to full replacement side intake vent kits

🧩 Product Design
This 6-piece kit is designed to cover the visible factory side fender vent and door garnish areas on C8 Z06 and E-Ray models.

Unlike full replacement side intake vent kits that may require door panel removal, factory trim removal, door handle disassembly, or hardware transfer, this overlay kit is designed to install over the factory exterior trim surfaces using automotive-grade double-sided tape.

✅ 6-piece overlay design
✅ Driver and passenger side components included
✅ Designed around the factory Z06 / E-Ray side intake profile
✅ Installs over the original exterior trim surfaces
✅ Does not replace the factory door handle mechanism
✅ Does not require door panel removal
✅ Does not require cutting or drilling

Please note: this product is designed as an exterior overlay kit. It is not a full replacement side intake vent assembly.

🧩 Material & Finish
✅ Pre-preg 2x2 3K Dry Carbon Fiber
✅ Gloss 2x2 twill dry carbon fiber finish
✅ UV-resistant clear coat
✅ Lightweight dry carbon construction
✅ Designed to visually match other gloss dry carbon fiber exterior upgrades

📌 Fitment
Compatible with:
✅ 2023–2026 Corvette C8 Z06
✅ 2024–2026 Corvette C8 E-Ray

Not compatible with:
❌ Corvette C8 Stingray
❌ Corvette C8 Z51
❌ Non-widebody C8 models

Before ordering, please confirm:
✅ Your model year
✅ Your Corvette C8 model
✅ Coupe or Convertible
✅ Your factory side fender vent and door garnish surfaces are undamaged
✅ Your vehicle has not been modified around the side intake / side garnish area

📦 What’s Included
✅ 6-piece pre-preg 2x2 3K dry carbon fiber side fender vent and door garnish overlay kit
✅ Driver side overlay pieces
✅ Passenger side overlay pieces
✅ Pre-applied or installation-ready automotive-grade double-sided tape

Please note:
This kit does not include factory replacement hardware because it is designed for adhesive overlay installation. Factory trim removal is not required for standard installation.

🔧 Installation Details
✅ Adhesive overlay installation
✅ No door panel removal required
✅ No factory door handle mechanism removal required
✅ No cutting required
✅ No drilling required
✅ No OEM hardware transfer required
✅ Test fitting is required before final installation
✅ Surface cleaning and proper tape adhesion are required
✅ Professional installation is recommended for best alignment

Recommended installation steps:
1. Clean the factory side vent and door garnish surfaces thoroughly
2. Remove wax, ceramic coating residue, dirt, and grease from the installation area
3. Test fit every piece before removing the adhesive backing
4. Confirm alignment with the door edge and side vent body lines
5. Warm the adhesive and surface if installing in a cold environment
6. Apply steady pressure after placement to ensure proper adhesion
7. Avoid washing the vehicle or exposing the area to heavy moisture immediately after installation

Important:
⚠ Do not install over dirty, waxed, wet, or freshly ceramic-coated surfaces
⚠ Do not remove the adhesive backing until fitment and alignment are confirmed
⚠ Adhesive products require proper surface preparation for long-term bonding
⚠ Minor alignment adjustment may be needed during test fitting
⚠ Installation damage, poor adhesion caused by improper surface preparation, or damage caused by forced installation is not considered a manufacturing defect

📦 Production Note
✅ This is a made-to-order dry carbon fiber product
✅ Estimated production lead time is around 15 business days before shipment
✅ Each kit is inspected before shipment for visible finish quality and general fitment condition
✅ Production time begins after order and vehicle information have been confirmed

🏁 Why Choose VASL Precision Series
✅ Pre-preg 2x2 3K Dry Carbon Fiber construction
✅ Designed specifically for C8 Z06 and E-Ray side intake profiles
✅ 6-piece exterior overlay design
✅ Easier installation compared to full replacement side intake vent kits
✅ No door panel removal required
✅ Gloss UV-resistant dry carbon fiber finish
✅ Clear made-to-order production expectations
✅ Backed by a 90-Day Structural Warranty

⚠ Legal Notice — California Proposition 65

This product may expose you to:
Styrene — cancer risk
Bisphenol A (BPA) — reproductive harm

Please review our Terms & Conditions before ordering.

• Customers must submit a Return Merchandise Authorization (RMA) request within 30 days of delivery to qualify for a refund.
  
• Products must be returned to our shipping facility at the buyer’s expense.
  
• All approved returns are subject to a 25% restocking fee.
  
• Special-order or custom-built products are non-returnable.
  
• If the product was purchased through an authorized VASL Performance dealer, please contact the dealer directly for all order and return inquiries.
  
• 
  We do not accept returns for any items that have been used, modified, painted, or installed.
  
• 
  Original shipping and handling fees are non-refundable.
  
• 
  Returned products must be shipped in their original packaging, in the same condition as originally delivered.
  
• 
  Only the original purchaser may request a return.
  
• 
  Defective items may be exchanged for the same item only. Upon receipt of the returned product, VASL Performance will inspect the item to verify its condition. If the product is deemed non-defective or non-returnable, the buyer will be responsible for any incurred costs.
  
• 
  All returns must be shipped prepaid. Any packages sent collect on delivery (COD) will be refused and returned at the buyer’s expense.
  
• 
  Refunds will not be issued for products that are damaged during return shipping to VASL Performance.

Manufacturing Time:

This carbon fiber product is made to order and requires approximately 15 business days for production before shipment.

We strive to provide accurate ETAs, but due to the made-to-order nature of performance-grade components, exact delivery times cannot be guaranteed.

⸻

Shipping Damage Policy

All products are carefully packaged to minimize the risk of damage during transit. However, occasional incidents may occur.
Upon delivery, buyers must inspect all packages and contents immediately before signing for the shipment.

If you notice any damage or irregularities (such as crushed, punctured, or torn boxes), please:
1. Do not accept the shipment, or
2. Clearly note all visible damages on the freight bill in the driver’s presence.

Accepting the shipment without notation releases both the shipping carrier and VASL Performance from further damage claims.

All damage claims must be reported to both the carrier and VASL Performance within 24 hours of delivery.