C8 Dry Carbon Fiber Replacement Mirror Covers | Stingray, Z06, E-Ray | VASL

Dry Carbon Fiber Replacement Mirror Covers for 2020–2026 Corvette C8

Upgrade the side profile of your Corvette C8 with the VASL Dry Carbon Fiber Replacement Mirror Covers.

Designed for C8 Stingray, Z51, Z06, and E-Ray models, this driver- and passenger-side mirror cover set replaces the factory exterior mirror caps with gloss 2x2 twill dry carbon fiber pieces for a cleaner OEM-style carbon fiber appearance.

This product is not a tape-on overlay, stick-on cap, or adhesive cover. The original factory mirror caps must be removed, and the dry carbon fiber replacement covers install onto the factory mirror housing while reusing the original mirror assembly, glass, electronics, motor, turn signal components, and mirror base.

🔥 Key Highlights
✅ Full replacement mirror cover set
✅ Not a tape-on overlay
✅ Pre-Preg 2x2 3K Dry Carbon Fiber construction
✅ Gloss UV-resistant clear coat
✅ Driver and passenger side included
✅ Designed for Corvette C8 Stingray, Z51, Z06, and E-Ray
✅ Factory mirror glass, motor, wiring, turn signal components, and mirror base are reused
✅ Cleaner OEM-style fitment compared to adhesive overlays
✅ No cutting or drilling required
✅ Made to order and inspected before shipment
✅ 90-Day Structural Warranty

✨ What You’ll Notice Immediately
✅ A cleaner carbon fiber mirror profile
✅ No visible overlay edge from tape-on caps
✅ More OEM-style appearance compared to adhesive mirror covers
✅ Gloss 2x2 twill dry carbon fiber depth
✅ Better coordination with carbon fiber splitters, side skirts, door garnish, rear wings, and engine bay pieces
✅ A more premium exterior detail from front, side, and rear viewing angles

🧩 Product Design
This replacement mirror cover set is designed to replace the factory exterior mirror caps on the Corvette C8.

Unlike adhesive mirror overlays that install over the original painted or carbon flash mirror caps, this product requires removal of the factory mirror caps before installation.

✅ Full replacement exterior mirror covers
✅ Driver and passenger side included
✅ Not a stick-on cap
✅ Not an overlay
✅ Installs onto the factory mirror housing
✅ Reuses the original mirror assembly and electronics
✅ Designed to maintain factory mirror function

Please note:
This product replaces the exterior mirror cover shells only. It does not include the complete mirror assembly, mirror glass, mirror motor, turn signal components, wiring, camera components, sensors, or mirror base.

🧩 Material & Finish
✅ Pre-Preg 2x2 3K Dry Carbon Fiber
✅ Gloss 2x2 twill dry carbon fiber finish
✅ UV-resistant clear coat
✅ Lightweight dry carbon construction
✅ Designed to visually match other gloss carbon fiber exterior upgrades
✅ Inspected before shipment for visible finish quality and general fitment condition

📌 Fitment
Compatible with:
✅ 2020–2026 Corvette C8 Stingray
✅ 2020–2026 Corvette C8 Stingray with Z51 Performance Package
✅ 2023–2026 Corvette C8 Z06
✅ 2024–2026 Corvette C8 E-Ray
✅ Coupe and Convertible models

Before ordering, please confirm:
✅ Your model year
✅ Your Corvette C8 model
✅ Coupe or Convertible
✅ Your factory mirror caps are undamaged and removable
✅ Your mirror housing and mirror assembly are not damaged
✅ Your vehicle has not been modified around the mirror housing area

📦 What’s Included
✅ Driver-side dry carbon fiber replacement mirror cover
✅ Passenger-side dry carbon fiber replacement mirror cover

Please note:
Factory mirror glass, mirror motors, mirror base, turn signal components, wiring, sensors, cameras, and complete mirror assemblies are not included.

This product is designed to replace the exterior mirror cap shells only.

🔧 Installation Details
✅ Factory mirror cap removal required
✅ Replacement cover installation onto the factory mirror housing
✅ No cutting required
✅ No drilling required
✅ No complete mirror assembly replacement required
✅ Factory mirror glass, motor, wiring, turn signal components, and mirror base are reused
✅ Test fitting is required before final installation
✅ Professional installation is recommended for best alignment

Important:
⚠ Do not force the factory mirror cap during removal
⚠ Improper removal may damage factory clips or mirror housing components
⚠ Confirm all mounting points and clip alignment before final installation
⚠ Verify mirror folding, adjustment, turn signal function, and clearance after installation
⚠ Installation damage, broken clips caused during removal, or damage caused by forced installation is not considered a manufacturing defect

Professional installation is recommended if you are not familiar with Corvette C8 mirror cap removal.

📦 Production Note
✅ This is a made-to-order dry carbon fiber product
✅ Estimated production lead time is around 15 business days before shipment
✅ Each pair is inspected before shipment for visible finish quality and general fitment condition
✅ Production time begins after order and vehicle information have been confirmed

🏁 Why Choose VASL Precision Series
✅ Pre-Preg 2x2 3K Dry Carbon Fiber construction
✅ Full replacement design instead of adhesive overlay
✅ Designed specifically for the Corvette C8 mirror profile
✅ Cleaner OEM-style appearance compared to tape-on mirror caps
✅ Gloss UV-resistant dry carbon fiber finish
✅ Clear made-to-order production expectations
✅ Backed by a 90-Day Structural Warranty

⚠ Legal Notice — California Proposition 65

This product may expose you to:
Styrene — cancer risk
Bisphenol A (BPA) — reproductive harm

Please review our Terms & Conditions before ordering.

• Customers must submit a Return Merchandise Authorization (RMA) request within 30 days of delivery to qualify for a refund.
  
• Products must be returned to our shipping facility at the buyer’s expense.
  
• All approved returns are subject to a 25% restocking fee.
  
• Special-order or custom-built products are non-returnable.
  
• If the product was purchased through an authorized VASL Performance dealer, please contact the dealer directly for all order and return inquiries.
  
• 
  We do not accept returns for any items that have been used, modified, painted, or installed.
  
• 
  Original shipping and handling fees are non-refundable.
  
• 
  Returned products must be shipped in their original packaging, in the same condition as originally delivered.
  
• 
  Only the original purchaser may request a return.
  
• 
  Defective items may be exchanged for the same item only. Upon receipt of the returned product, VASL Performance will inspect the item to verify its condition. If the product is deemed non-defective or non-returnable, the buyer will be responsible for any incurred costs.
  
• 
  All returns must be shipped prepaid. Any packages sent collect on delivery (COD) will be refused and returned at the buyer’s expense.
  
• 
  Refunds will not be issued for products that are damaged during return shipping to VASL Performance.

Manufacturing Time:

This carbon fiber product is made to order and requires approximately 15 business days for production before shipment.

We strive to provide accurate ETAs, but due to the made-to-order nature of performance-grade components, exact delivery times cannot be guaranteed.

⸻

Shipping Damage Policy

All products are carefully packaged to minimize the risk of damage during transit. However, occasional incidents may occur.
Upon delivery, buyers must inspect all packages and contents immediately before signing for the shipment.

If you notice any damage or irregularities (such as crushed, punctured, or torn boxes), please:
1. Do not accept the shipment, or
2. Clearly note all visible damages on the freight bill in the driver’s presence.

Accepting the shipment without notation releases both the shipping carrier and VASL Performance from further damage claims.

All damage claims must be reported to both the carrier and VASL Performance within 24 hours of delivery.