VASL ZR1-Style Vented Pre-Preg Carbon Fiber Hood | 2014–2019 Corvette C7 Stingray / Z51 / Z06 / Grand Sport

VASL ZR1-Style Vented Pre-Preg Carbon Fiber Hood for 2014–2019 Corvette C7

Transform the front profile of your Corvette C7 with the VASL ZR1-Style Vented Pre-Preg Carbon Fiber Hood.

Designed for Corvette C7 Stingray, Z51, Z06, and Grand Sport models, this full replacement hood adds a ZR1-inspired front-end appearance with central venting, sculpted surface lines, and premium carbon fiber presence.

ZR1-style describes the hood's appearance. This hood does NOT fit factory C7 ZR1 models and is not a C8 hood.

This product is not a carbon fiber overlay, decorative hood skin, or tape-on cover. It is a complete replacement hood designed to install using the factory hood mounting locations, with final panel alignment, hood-height adjustment, and latch verification required during installation.

Available in single-sided or double-sided pre-preg 2x2 3K carbon fiber, this hood allows customers to choose the level of carbon fiber presentation that best fits their build.

🔥 Key Highlights
✅ C7 ZR1-style hood design with central venting
✅ Fits C7 Stingray, Z51, Z06, and Grand Sport
✅ Does NOT fit factory C7 ZR1 models
✅ Full replacement hood — not an overlay
✅ Pre-preg 2x2 3K carbon fiber construction
✅ Single-sided and double-sided carbon fiber options
✅ Gloss UV-resistant clear coat
✅ Designed around factory hood mounting locations
✅ Reuses applicable factory hinges, latch components, and related hardware
✅ Made to order and inspected before shipment
✅ 90-Day Structural Warranty

✨ What You’ll Notice Immediately
✅ A more aggressive ZR1-inspired front profile
✅ Central venting and sculpted hood contours
✅ Premium 2x2 twill carbon fiber visual depth
✅ A cleaner carbon fiber exterior presentation
✅ Optional double-sided carbon fiber underside for show-level detail
✅ A major visual upgrade over the factory C7 hood
✅ Carbon fiber styling that pairs well with front splitters, side skirts, canards, and rear aero components

🧩 Single-Sided vs. Double-Sided Carbon Fiber

Single-Sided Pre-Preg Carbon Fiber
✅ Visible pre-preg 2x2 3K carbon fiber on the exterior surface
✅ Gloss UV-resistant clear coat on the visible carbon surface
✅ More accessible price point
✅ Best for customers who mainly want the exterior ZR1-style carbon fiber appearance

Double-Sided Pre-Preg Carbon Fiber
✅ Visible pre-preg 2x2 3K carbon fiber on both the exterior surface and underside
✅ Premium carbon fiber presentation when the hood is open
✅ More complete show-build appearance
✅ Best for customers who want a full carbon fiber look inside and out

“Double-sided” means visible carbon fiber is present across both the exterior and underside of the hood.

🧩 Material & Craftsmanship
✅ Pre-preg 2x2 3K carbon fiber construction
✅ Gloss 2x2 twill carbon fiber finish
✅ UV-resistant clear coat for long-term visual clarity
✅ ZR1-style sculpted hood profile with central venting
✅ Full replacement hood structure
✅ Inspected before shipment for finish quality and mounting-area condition

🚗 Full Replacement Hood Design
This ZR1-style vented hood is designed to replace the original Corvette C7 Stingray, Z51, Z06, or Grand Sport front hood.

The factory hood must be removed, and applicable OEM components must be transferred to the carbon fiber replacement hood during installation.

✅ Complete replacement hood
✅ Not a tape-on or adhesive-mounted overlay
✅ Not a carbon fiber hood skin
✅ Designed around factory hood mounting locations
✅ Reuses applicable OEM hinges, latch components, bump stops, hood supports, and related hardware
✅ Engine-bay and surrounding-panel clearance must be checked
✅ Final panel alignment and latch adjustment are required

This product is not designed to install over the original factory hood. It does not fit factory C7 ZR1 models.

📌 Fitment
Compatible with:
✅ 2014–2019 Corvette C7 Stingray
✅ 2014–2019 Corvette C7 Stingray with Z51 Performance Package
✅ 2015–2019 Corvette C7 Z06
✅ 2017–2019 Corvette C7 Grand Sport

Before ordering, please confirm:
✅ Your model year
✅ Your Corvette C7 model
✅ Coupe or Convertible
✅ Your factory hood and surrounding body panels are undamaged
✅ Your vehicle has not undergone structural front-body modification
✅ Any aftermarket intake, supercharger, or engine-bay components have adequate hood clearance
✅ The hood is completely inspected and test fitted before modification, painting, refinishing, or final installation

Does NOT fit factory C7 ZR1 models. E-Ray is not a C7 application. This listing is not for Corvette C8 models.

📦 What’s Included
✅ One C7 ZR1-style vented pre-preg carbon fiber replacement hood in the selected carbon finish

Please note:
Mounting hardware and installation manual are not included. Reuse applicable OEM hardware for installation.

Factory hinges, latch components, hood supports, bump stops, wiring, brackets, and related vehicle hardware are not included unless specifically confirmed with your order.

Applicable OEM components must be transferred from the original hood during installation.

🔧 Installation Details
✅ Full replacement hood installation
✅ Direct bolt-on installation using factory hood mounting locations
✅ No drilling or modification is intended for the listed factory applications
✅ Applicable factory hinges, latch components, and OEM hardware are reused
✅ Complete test fitting is required before modification, painting, refinishing, or final installation
✅ Hood height and panel gaps must be adjusted during installation
✅ Latch engagement must be fully verified before driving
✅ Engine-bay and surrounding body-panel clearance must be inspected
✅ Professional installation is required

Important:
⚠ Do not drill, modify, paint, refinish, or permanently install the hood before completing a full inspection and test fit
⚠ Do not force the hood closed if the latch or surrounding panel alignment is incorrect
⚠ Minor alignment adjustment may be required to achieve consistent panel gaps
⚠ Always confirm that the primary and secondary hood-latch functions are operating correctly
⚠ Verify clearance around aftermarket engine-bay components before closing the hood
⚠ Make sure the hood is fully secured before driving
⚠ Installation damage and damage caused by incorrect alignment are not manufacturing defects

Professional installation by an experienced body shop or Corvette performance installer is required.

📦 Production Note
✅ This is a made-to-order carbon fiber product
✅ Estimated production lead time is around 15 business days before shipment
✅ Each hood is inspected before shipment for visible finish quality and mounting-area condition
✅ Production time begins after order and vehicle information have been confirmed

🏁 Why Choose VASL Precision Series
✅ Pre-preg 2x2 3K carbon fiber construction
✅ Single-sided and double-sided carbon fiber options
✅ Full replacement design rather than a decorative overlay
✅ ZR1-inspired vented front-end appearance for Corvette C7 builds
✅ Designed for C7 Stingray, Z51, Z06, and Grand Sport applications
✅ Gloss UV-resistant carbon fiber finish
✅ Clear made-to-order production expectations
✅ Backed by a 90-Day Structural Warranty

⚠ Legal Notice — California Proposition 65

This product may expose you to:
Styrene — cancer risk
Bisphenol A (BPA) — reproductive harm

Please review our Terms & Conditions before ordering.

• Customers must submit a Return Merchandise Authorization (RMA) request within 30 days of delivery to qualify for a refund.
  
• Products must be returned to our shipping facility at the buyer’s expense.
  
• All approved returns are subject to a 25% restocking fee.
  
• Special-order or custom-built products are non-returnable.
  
• If the product was purchased through an authorized VASL Performance dealer, please contact the dealer directly for all order and return inquiries.
  
• 
  We do not accept returns for any items that have been used, modified, painted, or installed.
  
• 
  Original shipping and handling fees are non-refundable.
  
• 
  Returned products must be shipped in their original packaging, in the same condition as originally delivered.
  
• 
  Only the original purchaser may request a return.
  
• 
  Defective items may be exchanged for the same item only. Upon receipt of the returned product, VASL Performance will inspect the item to verify its condition. If the product is deemed non-defective or non-returnable, the buyer will be responsible for any incurred costs.
  
• 
  All returns must be shipped prepaid. Any packages sent collect on delivery (COD) will be refused and returned at the buyer’s expense.
  
• 
  Refunds will not be issued for products that are damaged during return shipping to VASL Performance.

Production Time

This made-to-order carbon fiber product requires approximately 15 business days for production before shipment.

Free shipping is available on U.S. orders of $99 or more. Tracking information will be provided after shipment.

Shipping Damage Policy

Inspect all packages and contents before signing for delivery. If damage or irregularities are visible, refuse the shipment or clearly note the damage on the freight bill in the driver’s presence. Damage claims must be reported to both the carrier and VASL Performance within 24 hours of delivery.