Corvette C8 Stingray Carbon Fiber Engine Bay Panels | VASL Performance

OE-Style 2-Piece Carbon Fiber Engine Bay Side Panels for 2020–2026 Corvette C8 Stingray Coupe

Complete the visible engine compartment of your Corvette C8 Stingray Coupe with the VASL OE-Style Carbon Fiber Engine Bay Side Panel Set.

Designed for 2020–2026 Corvette C8 Stingray Coupe models, with or without the Z51 Performance Package, this two-piece set replaces the factory plastic panels positioned on the driver and passenger sides of the engine compartment.

The factory-inspired profile retains the integrated louver layout and surrounding service-access openings while replacing the original plastic appearance with visible carbon fiber. Once installed, the two panels frame the engine and create a cleaner, more complete carbon fiber presentation through the rear engine window.

Each panel is manufactured from pre-preg 2x2 3K carbon fiber and finished with a gloss UV-resistant clear coat that highlights the twill weave and coordinates with other carbon fiber engine bay and exterior upgrades.

This product is a two-piece direct-replacement engine bay side panel set. It is not a center engine cover, tape-on overlay, engine brace cover, complete engine appearance package, or replacement rear hatch assembly.

🔥 Key Highlights

✅ Pre-preg 2x2 3K carbon fiber construction
✅ Complete two-piece engine bay side panel set
✅ Driver-side and passenger-side panels included
✅ Direct replacement for the factory plastic side panels
✅ OE-style integrated louver design
✅ Designed for 2020–2026 Corvette C8 Stingray Coupe
✅ Compatible with models with or without the Z51 Performance Package
✅ Uses the factory engine bay mounting locations
✅ Gloss UV-resistant clear coat
✅ Installation hardware included
✅ Made to order and inspected before shipment
✅ 90-Day Structural Warranty

✨ What You’ll Notice Immediately

✅ A cleaner and more complete engine bay presentation
✅ Visible carbon fiber framing both sides of the engine
✅ Clear 2x2 twill carbon fiber weave
✅ Better coordination with a carbon fiber center engine cover
✅ A more refined appearance through the rear engine window
✅ Less visible factory black plastic around the engine compartment
✅ An OE-style upgrade without changing the central engine cover design

🧩 Pre-Preg Carbon Fiber Construction

The driver-side and passenger-side panels are manufactured from pre-preg 2x2 3K carbon fiber.

✅ Pre-preg carbon fiber construction
✅ 2x2 3K twill carbon weave
✅ Lightweight and rigid molded panel structure
✅ Gloss UV-resistant clear coat
✅ Clear and consistent visible carbon weave
✅ Inspected before shipment for finish quality and installation readiness

This product should be described as Pre-Preg Carbon Fiber and should not be promoted as Dry Carbon unless the specific manufacturing classification is separately confirmed.

🚘 OE-Style Louvered Direct-Replacement Design

The two carbon fiber panels are designed to replace the factory plastic panels positioned on either side of the engine.

The molded profiles preserve the factory-inspired louver layout, mounting locations, surrounding contours, and passenger-side service-access opening.

✅ Driver-side replacement panel included
✅ Passenger-side replacement panel included
✅ Integrated louver openings
✅ Factory-inspired engine bay profile
✅ Designed around the original mounting areas
✅ Replaces the factory plastic side panels
✅ Does not install over the original panels
✅ Does not replace the central engine cover
✅ Does not include an engine brace or complete rear hatch assembly

The louver openings should be described as part of the panel design. Do not claim a measured reduction in engine temperature or improved cooling unless testing data is available.

📌 Fitment

Compatible with:

✅ 2020–2026 Corvette C8 Stingray Coupe
✅ Stingray models with the Z51 Performance Package
✅ Stingray models without the Z51 Performance Package

Not compatible with:

❌ Corvette C8 Stingray Convertible / HTC

Not included under this listing unless separately confirmed:

❌ Corvette C8 Z06
❌ Corvette C8 E-Ray
❌ Corvette C8 ZR1
❌ Corvette C8 ZR1X

Before ordering, please confirm:

✅ Your vehicle is a Corvette C8 Stingray Coupe
✅ Your model year
✅ Whether your vehicle has the Z51 Performance Package
✅ The factory engine bay side panels and mounting locations are undamaged
✅ The vehicle has not been modified in a way that affects the factory panel mounting points

📦 What’s Included

✅ Driver-side pre-preg carbon fiber engine bay side panel
✅ Passenger-side pre-preg carbon fiber engine bay side panel
✅ Supplied installation hardware

Please note:

The central engine cover, engine brace, rear glass, rear hatch components, surrounding trim, reservoirs, caps, and additional engine bay accessories are not included.

Factory screws, clips, rubber grommets, or other reusable mounting components may need to be transferred from the original panels where required.

🔧 Installation Details

✅ Direct replacement installation
✅ Factory plastic side panels must be removed
✅ Uses the factory engine bay mounting locations
✅ No drilling, cutting, or trimming is normally required
✅ Factory clips, grommets, or fasteners may need to be reused
✅ Professional installation is recommended

Important:

⚠ Allow the engine compartment and surrounding components to cool completely before beginning installation
⚠ Retain all factory fasteners, clips, and rubber mounting components during removal
⚠ Complete a full test fit before tightening any hardware
⚠ Confirm that all mounting holes and service-access openings align correctly
⚠ Do not force the carbon fiber panel into position
⚠ Do not overtighten fasteners against the carbon fiber surface
⚠ Do not drill, sand, trim, or modify the panels before completing a full test fit
⚠ Confirm that no wiring, hoses, caps, or service points are obstructed
⚠ Recheck all mounting hardware after the first several engine heat cycles

Professional installation is recommended to protect the carbon fiber finish and ensure correct alignment with the surrounding engine bay components.

📦 Production Note

✅ This is a made-to-order carbon fiber product
✅ Estimated production lead time is around 15 business days before shipment
✅ Each two-piece panel set is inspected before shipment for finish quality and installation readiness

🏁 Why Choose VASL Precision Series

✅ Pre-preg 2x2 3K carbon fiber construction
✅ Complete driver-side and passenger-side panel set
✅ Direct replacement instead of a tape-on overlay
✅ OE-style louvered design
✅ Designed specifically for the C8 Stingray Coupe engine compartment
✅ Compatible with Stingray models with or without Z51
✅ Premium gloss carbon fiber finish
✅ Coordinates with the VASL carbon fiber center engine cover
✅ Made to order and inspected before shipment
✅ Backed by a 90-Day Structural Warranty

⚠ Legal Notice — California Proposition 65

This product may expose you to:

Styrene — cancer risk
Bisphenol A (BPA) — reproductive harm

Please review our Terms & Conditions before ordering.

• Customers must submit a Return Merchandise Authorization (RMA) request within 30 days of delivery to qualify for a refund.
  
• Products must be returned to our shipping facility at the buyer’s expense.
  
• All approved returns are subject to a 25% restocking fee.
  
• Special-order or custom-built products are non-returnable.
  
• If the product was purchased through an authorized VASL Performance dealer, please contact the dealer directly for all order and return inquiries.
  
• 
  We do not accept returns for any items that have been used, modified, painted, or installed.
  
• 
  Original shipping and handling fees are non-refundable.
  
• 
  Returned products must be shipped in their original packaging, in the same condition as originally delivered.
  
• 
  Only the original purchaser may request a return.
  
• 
  Defective items may be exchanged for the same item only. Upon receipt of the returned product, VASL Performance will inspect the item to verify its condition. If the product is deemed non-defective or non-returnable, the buyer will be responsible for any incurred costs.
  
• 
  All returns must be shipped prepaid. Any packages sent collect on delivery (COD) will be refused and returned at the buyer’s expense.
  
• 
  Refunds will not be issued for products that are damaged during return shipping to VASL Performance.

Manufacturing Time:

This carbon fiber product is made to order and requires approximately 15 business days for production before shipment.

We strive to provide accurate ETAs, but due to the made-to-order nature of performance-grade components, exact delivery times cannot be guaranteed.

⸻

Shipping Damage Policy

All products are carefully packaged to minimize the risk of damage during transit. However, occasional incidents may occur.
Upon delivery, buyers must inspect all packages and contents immediately before signing for the shipment.

If you notice any damage or irregularities (such as crushed, punctured, or torn boxes), please:
1. Do not accept the shipment, or
2. Clearly note all visible damages on the freight bill in the driver’s presence.

Accepting the shipment without notation releases both the shipping carrier and VASL Performance from further damage claims.

All damage claims must be reported to both the carrier and VASL Performance within 24 hours of delivery.