Corvette C8 Stingray Carbon Fiber Side Vent Garnish | VASL Performance

Dry Carbon Fiber Side Door & Fender Vent Garnish Overlay for 2020–2026 Corvette C8 Stingray

Add a clean and highly visible dry carbon fiber accent to the side profile of your C8 Stingray with the VASL Side Door and Fender Vent Garnish Overlay Set.

Designed for 2020–2026 Corvette C8 Stingray models, with or without the Z51 Performance Package, this complete four-piece set follows the factory side door and fender vent contours while adding the depth, weave clarity, and premium appearance of real dry carbon fiber.

Manufactured from pre-preg 2x2 3K carbon fiber, each piece features a lightweight, rigid construction and a gloss UV-resistant clear coat that highlights the twill carbon weave while helping protect the finish from long-term sun exposure.

This product is a tape-on garnish overlay set. It installs over the existing factory surfaces and is not a full replacement side scoop, door handle, or fender vent assembly.

🔥 Key Highlights

✅ Dry carbon fiber construction
✅ Pre-preg 2x2 3K carbon fiber material
✅ Complete four-piece garnish overlay set
✅ Designed for 2020–2026 Corvette C8 Stingray
✅ Compatible with models with or without the Z51 Performance Package
✅ Factory-profile side door and fender vent styling
✅ Pre-applied double-sided adhesive tape
✅ Tape-on overlay installation
✅ No drilling required
✅ Gloss UV-resistant clear coat
✅ Made to order and inspected before shipment
✅ 90-Day Structural Warranty

✨ What You’ll Notice Immediately

✅ A more defined and premium side intake profile
✅ Visible dry carbon fiber accents on both sides of the vehicle
✅ Clearer carbon weave depth than printed or hydro-dipped trim
✅ Cleaner visual continuity through the side door and fender vent area
✅ A noticeable exterior upgrade without replacing factory body components
✅ Better coordination with carbon fiber mirror covers, side skirts, front splitters, and rear aero components

🧩 Dry Carbon Fiber Construction

This garnish set is manufactured from pre-preg 2x2 3K carbon fiber, commonly referred to as dry carbon fiber.

Compared with heavier carbon-look plastic or wet-lay decorative trim, dry carbon fiber provides a cleaner, more consistent weave appearance and a lightweight, rigid structure.

✅ Pre-preg dry carbon fiber construction
✅ 2x2 3K twill carbon weave
✅ Lightweight and rigid overlay structure
✅ Gloss UV-resistant clear coat
✅ Clear and consistent carbon weave appearance
✅ Inspected before shipment for finish quality and fitment readiness

🚪 Complete Four-Piece Overlay Set

The package includes four individual dry carbon fiber garnish pieces designed for the left and right side door and fender vent areas.

✅ Four dry carbon fiber garnish overlays included
✅ Left- and right-side coverage
✅ Designed around the factory Stingray side intake contours
✅ Installs over the existing factory surfaces
✅ No factory side scoop replacement required
✅ No door handle component replacement required
✅ No drilling required

This is not a full replacement side scoop or door handle assembly.

📌 Fitment

Compatible with:

✅ 2020–2026 Corvette C8 Stingray
✅ Models with the Z51 Performance Package
✅ Models without the Z51 Performance Package

Not compatible with:

❌ Corvette C8 Z06
❌ Corvette C8 E-Ray
❌ Corvette C8 ZR1

Before ordering, please confirm:

✅ Your model year
✅ Your vehicle is a Corvette C8 Stingray
✅ Your current side door and fender vent surfaces are undamaged
✅ The mounting surfaces are suitable for adhesive installation

📦 What’s Included

✅ Four-piece dry carbon fiber side door and fender vent garnish overlay set
✅ Pre-applied double-sided adhesive tape

Please note:

Factory side scoops, door handles, fender vent assemblies, replacement panels, screws, and mounting clips are not included and do not need to be removed for installation.

🔧 Installation Details

✅ Tape-on overlay installation
✅ Pre-applied double-sided adhesive tape
✅ No drilling required
✅ No factory side scoop removal required
✅ No factory door handle component removal required
✅ Complete test fitting is required before removing the adhesive backing
✅ All mounting surfaces must be thoroughly cleaned, dried, and degreased
✅ Proper alignment must be confirmed before applying pressure
✅ Apply firm and even pressure across each piece after final positioning

Important:

⚠ Wax, polish, ceramic coating, dirt, grease, oil, or moisture may reduce adhesive performance
⚠ Do not remove the adhesive backing until all four pieces have been test fitted
⚠ Do not install on a wet, dirty, recently waxed, or excessively cold surface
⚠ Allow the adhesive sufficient time to bond before washing the vehicle or driving in severe weather

Professional installation is recommended for the cleanest alignment and best long-term adhesive performance.

📦 Production Note

✅ This is a made-to-order dry carbon fiber product
✅ Estimated production lead time is around 15 business days before shipment
✅ Each four-piece set is inspected before shipment for finish quality and fitment readiness

🏁 Why Choose VASL Precision Series

✅ Real dry carbon fiber rather than printed or hydro-dipped carbon-look plastic
✅ Pre-preg 2x2 3K carbon fiber construction
✅ Complete four-piece left- and right-side overlay set
✅ Designed specifically for the C8 Stingray side profile
✅ Pre-applied adhesive tape for a no-drill installation
✅ Competitive pricing for a complete dry carbon fiber garnish overlay set
✅ Designed to coordinate with matching VASL carbon fiber exterior components
✅ Backed by a 90-Day Structural Warranty

⚠ Legal Notice — California Proposition 65

This product may expose you to:

Styrene — cancer risk
Bisphenol A (BPA) — reproductive harm

Please review our Terms & Conditions before ordering.

• Customers must submit a Return Merchandise Authorization (RMA) request within 30 days of delivery to qualify for a refund.
  
• Products must be returned to our shipping facility at the buyer’s expense.
  
• All approved returns are subject to a 25% restocking fee.
  
• Special-order or custom-built products are non-returnable.
  
• If the product was purchased through an authorized VASL Performance dealer, please contact the dealer directly for all order and return inquiries.
  
• 
  We do not accept returns for any items that have been used, modified, painted, or installed.
  
• 
  Original shipping and handling fees are non-refundable.
  
• 
  Returned products must be shipped in their original packaging, in the same condition as originally delivered.
  
• 
  Only the original purchaser may request a return.
  
• 
  Defective items may be exchanged for the same item only. Upon receipt of the returned product, VASL Performance will inspect the item to verify its condition. If the product is deemed non-defective or non-returnable, the buyer will be responsible for any incurred costs.
  
• 
  All returns must be shipped prepaid. Any packages sent collect on delivery (COD) will be refused and returned at the buyer’s expense.
  
• 
  Refunds will not be issued for products that are damaged during return shipping to VASL Performance.

Manufacturing Time:

This carbon fiber product is made to order and requires approximately 15 business days for production before shipment.

We strive to provide accurate ETAs, but due to the made-to-order nature of performance-grade components, exact delivery times cannot be guaranteed.

⸻

Shipping Damage Policy

All products are carefully packaged to minimize the risk of damage during transit. However, occasional incidents may occur.
Upon delivery, buyers must inspect all packages and contents immediately before signing for the shipment.

If you notice any damage or irregularities (such as crushed, punctured, or torn boxes), please:
1. Do not accept the shipment, or
2. Clearly note all visible damages on the freight bill in the driver’s presence.

Accepting the shipment without notation releases both the shipping carrier and VASL Performance from further damage claims.

All damage claims must be reported to both the carrier and VASL Performance within 24 hours of delivery.